6/19/2023 0 Comments Jetbrains clion![]() ![]() The solution is straightforward: disable the compiler check by adding the following before the project clause: SET(CMAKE_C_COMPILER_WORKS 1) When I use a custom CMake project, diagnostics like “Compiler can’t compile a simple program” appear. However, some probes, such as advanced models of Segger J-Link, can help overcome the problem. If more breakpoints are set, gdb will not work properly. For most Cortexes, the limit is 6 breakpoints simultaneously (not counting disabled ones). There is a limit on how many hardware breakpoints are used. Those GDB servers MUST be run in single-run mode ( -s CLI switch in the case of SEGGER). Make sure that you have only one gdbserver instance running. I’m seeing strange Gdbserver behavior, like missed or miracle breakpoints, strange hangs, etc. The setup procedure is briefly described in this article. It can be ST-Link, Segger, PE Micro, or something else. The GDB server is specific to your debug probe. The linker script and the libraries usually can be taken from a standard example for the chip.Īs a toolchain, you should use compilers from the GNU ARM toolchain, as well as a debugger – either the GDB from the toolchain or CLion’s bundled GDB.
0 Comments
Leave a Reply. |